Hey, no offense, but your Swim Spa Cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it happens to all spa owners at one time or another; water is one of nature’s most erosive compounds. Moisture leaks in and becomes trapped in between the external vinyl shell and the plastic wrapped foam cores. The warm, wet environment is ideal for mold and mildew and other types of stinky stuff.
If moisture has actually permeated even more into the cling wrap foam core, the cover ends up being waterlogged, which can rapidly grow all sorts of dark and foul-smelling slime, but likewise make the cover really challenging to remove, and not as reliable at keeping the heat in the spa. Time for a better kind of Swim Spa Cover
Smelly Swim Spa Cover?!?
• Broken or damaged. Split foam cores, ripped or worn areas, torn seams. A Swim Spa Cover that loses it’s arched roof line, to keep water draining off properly, will ultimately start to puddle water, which is most likely time to purchase a new Swim Spa Cover! A Swim Spa Cover with threadbare areas in the vinyl is also bad news, and although you can ward off the unavoidable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Remove your Swim Spa Cover weekly for 2 hours of airing out. A much better Swim Spa Cover can stand up to longer periods, however it’s a good practice to eliminate the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow moisture to escape do so, but don’t get rid of fragile foam panels unless definitely needed.
Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, but it will not stop moisture extremely well. Even the best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat welded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only real option is a Swim Spa Cover uses air to insulate instead of foam.
• Bad Spa Water. If the spa water is not kept frequently with sanitizer and filtering, or is not stunned frequently enough, bacteria and algae can make the most of a congenial environment to flourish. Low pH, high chlorine or high ozone levels can also weaken the underside of your Swim Spa Cover cover. Because the cover is so near the spa, it soaks up the chemistry of the spa. Tidy, clear and sanitary water is the very best environment to prevent stinky spa covers. (Sorry however this is simply BS) The reality is the spaces in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roofing system, that can be worse than no roofing system at all, if an overhanging eave drains water onto the Swim Spa Cover Tidy and condition a spa cover 2-4 times annually, so that it always looks terrific, and is protected from the elements. Again, this truly isn’t going to stop the mold and mildew from growing inside a foam cover But it will assist your spa dealership pay their expenses. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.
Repair Your Swim Spa Cover!
• Remove to Safe Location: This first step might appear apparent, however you need an excellent place to permit the cover to sit undisturbed from family pets, wild animals, and winds. It must be a sunny place if possible, or a dry indoor place with low humidity can also be used.
• Deodorize & Disinfect: You might not have to do both, it’s finest to be as gentle as possible. Don’t use household cleaning products on your Swim Spa Cover, unusual chemicals can wind up in your spa water. Carefully clean all outside surfaces with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this need to be prevented if possible, due to the fact that the panels could end up being damaged throughout elimination or cleaning. However if you figure out that there is something slimy within, you can typically unzip and remove the panel for a cleaning inside and out.
How typically does your spa dealership expect you to do all this? If your swim spa is protected from the majority of sun and rain, twice each year. If it’s visible it should be 3-4 times each year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster.
Much better Choice
The most convenient remedy for a smelly Swim Spa Cover is to just purchase a different sort of Swim Spa Cover A foul-smelling swim spa cover just means that your cover is taking on wetness, and things are starting to grow! Lightweight Swim Spa Covers from SpaCap.com that doesn’t use foam however has actually sealed air chambers instead will avoid giving the mold and mildew a place to grow in the first place.